KH-850 Intelligent Sawing and Milling Machining Center
It can perform automated functions such as raw-material feeding, automatic cutting, automatic milling, automated output of finished parts, and automatic marking, achieving a high degree of overall machine automation and significantly enhancing processing efficiency.
Inquiry
Keywords:
智能锯铣激光加工中心
Sawing and milling equipment
Detailed Introduction
Equipment Features
1. Intelligent Operation: Connects online with ERP software to automatically execute all machining operations.
2. Automation: It can perform automated functions such as raw-material feeding, automatic cutting, automatic milling, automated output of finished parts, and automatic marking, achieving a high degree of overall machine automation and significantly enhancing processing efficiency.
3. Fully enclosed sawing and milling unit: Effective prevention of aluminum chip spatter is achieved through an integrated automatic chip-removal system within the saw-milling unit, which transports the cut-off scrap to a collection area and automatically discharges it outside the unit.
4. Automatic Discharge System: It can automatically arrange the cut finished materials in sequence.
5. Automatic labeling: Assign a unique QR code and custom content to each profile (customer information, sorting information, and process information).
Equipment Advantages
1. Integrated, all-in-one machining equipment: three-axis cutting (with arbitrary-angle upper cutting) + 20-axis servo control + six-axis drilling and milling + dual-laser scribing.
2. Machining of process holes:
Equipped with six high-power drilling and milling spindles.
Interior and exterior window sashes: handle holes, corner bracket holes, sealant injection holes, lock box holes, pin holes, and transmission rod notches.
Outer frame and central post: floor drain drainage holes, corner bracket holes, sealant injection holes, and dowel pin holes.
2. Cutting Process: Equipped with one upper cutting spindle capable of rotating to any angle within a ±22.5° range, and two lower cutting spindles fixed at 45°.
3. Corner guard cutting: The saw blade can move rapidly, enabling fast cutting of corner guards.
4. Laser scribing: Equipped with two scribing lasers for automatic scribing of the outer frame’s central column.
5. Cutting process: Equipped with one upper cutting spindle capable of rotating to any angle within a ±22.5° range and two lower cutting spindles fixed at 45°.
6. Automatic Labeling: Assign a unique QR code to each profile, along with customizable content (customer information, sorting information, and process information).
7. Intelligent Connectivity
It can integrate with all major door and window ERP systems to enable smart, scan-based processing.
Use door and window software to convert drawings into production data and integrate with manufacturing equipment.
Leverage data-driven manufacturing to meet the demand for flexible, customized production of doors and windows.
Achieve seamless collaboration between the front end and back end, truly realizing “what you see is what you get, and what you draw is what is produced.”
Technical Specifications
| Serial Number |
Name |
Detailed Specifications |
| 1 |
Equipment Model |
KH-850 |
| 2 |
Input Power |
380V / 50Hz |
| 3 |
Operating air pressure |
0.6-0.8MPa |
| 4 |
Gas consumption |
120L/min |
| 5 |
Total power |
49KW |
| 6 |
Drill-milling motor |
3.5 kW × 6, 18,000 r/min |
| 7 |
Cutting motor |
4 kW × 3 3000 r/min |
| 8 |
Servo motor |
0.85 kW × 5, 0.75 kW × 12, 0.4 kW × 2, 1.5 kW × 1 |
| 9 |
Chip conveyor motor |
0.4KW |
| 10 |
Saw blade specifications |
φ550 × φ30 × 4.6, Z = 120T |
| 11 |
Saw-cut profile cross-sectional dimensions (width × height) |
150 x 150 mm |
| 12 |
Sawing angle |
Any angle between -22.5° and +22.5° |
| 13 |
Accuracy |
Cutting accuracy: ±0.1 mm; Milling accuracy: ±0.05 mm |
| 14 |
Feed length |
800–7,000 mm (customizable) |
| 15 |
Sawing length |
300~6500mm |
| 16 |
External dimensions (length × width × height) |
22000x3400x3000mm |
| 17 |
Overall weight |
11500Kg |
Configuration Instructions
| Serial Number |
Name |
Brand |
Remarks |
| 1 |
PLC computer |
Delta |
Taiwanese brand |
| 2 |
Servo motor |
Delta |
Taiwanese brand |
| 3 |
Servo drive |
Delta |
Taiwanese brand |
| 4 |
Sawing motor |
Deep friendship |
Chinese brand |
| 5 |
Drill-milling motor |
Tianyang |
Chinese brand |
| 6 |
Laser scribing tool |
Customized Dedicated Laser |
|
| 7 |
Reducer |
New Treasure |
Chinese brand |
| 8 |
Pneumatic components |
AirTac |
Taiwanese brand |
| 9 |
Linear guide rail |
Zeyuan |
Chinese brand |
| 10 |
Electrical components |
Schneider |
French brand |
| 11 |
Cable |
Lapp |
German brand |
| 12 |
Trachea |
AirTac |
Taiwanese brand |
| 13 |
Saw blade |
Customized Diamond |
|
| 14 |
Photoelectric switch |
Omron |
Japanese brand |
Delta System Comparison Explanation
| Main Project |
Next project |
Specific Projects |
Delta |
A certain domestic brand |
Specific explanation |
| Hardware Configuration |
Controller |
|
Delta NC50E |
HANS |
Standard CNC, full-featured |
| Servo |
|
Delta servo |
Third-party server |
Complete Delta solution, exclusively tailored and optimized |
|
| Input/Output |
Output |
Relay |
Optocoupler |
Relay outputs feature high dielectric strength and greater reliability. |
|
| Solution Architecture |
|
|
PC+CNC |
PC |
PC+NC front-end and back-end architecture: a Windows crash does not affect control, and emergency stop functions remain operational, enhancing safety. |
| Basic Functions |
Scan to process |
|
Support |
Support |
Process via QR code scanning |
| Format support |
thinkerx |
Support |
Support |
Bill of Materials Format |
|
|
|
Duterte |
Support |
Support |
Bill of Materials Format |
|
|
|
Long Wind |
Support |
Support |
Bill of Materials Format |
|
|
|
Easy to calculate doors and windows |
Support |
Support |
Bill of Materials Format |
|
| Add order |
|
Support |
Support |
Reusing short materials |
|
| Labeling |
|
Support |
Support |
Cutting, Printing, Production, and Shipping Information |
|
| Empty Run Mode |
|
Support |
Support |
Running empty without materials |
|
| Software Differences |
Template Library |
|
Support |
Not supported |
Accelerate template creation to save drafting time. |
| Drawing Import |
|
Support |
Not supported |
Porous Infiltration Processing |
|
| Handwheel Simulation |
|
Support |
Not supported |
During the first machining pass, operate at the handwheel’s slow-speed setting for greater safety and reliability. |
|
| 3D simulation |
|
Support |
Not supported |
Proactive troubleshooting, safe production, and prevention of errors and losses. |
|
| Machine differences |
Arbitrary angle |
|
Support |
Not supported |
Special-angle machining |
| Direct-drive drilling and milling |
|
Support |
Not supported |
All drilling and milling operations now use servo drives, eliminating pneumatic components for faster, more stable performance and lower failure rates. |
Delta System 3D View
Delta’s system is equipped with a proprietary 3D visualization feature that provides an intuitive view of the hole locations and cut sections to be machined on the profiles.
As shown in the standard system & 3D view
Patented Technology: Servo Clamping (Universal Blank Holder):
|
Without servo clamping, the fan-shaped material is prone to tilting during cutting. |
All patent infringements will be prosecuted. |
|
The servo clamping function can be used to align the profile. Servo clamping adjustment range: 0.001 mm–40 mm. |
Exhibition Information
Packaging and shipping
Inquiry
Please provide your contact information and details of your requirements, and we will arrange for a specialist to get in touch with you!
KH-850 Intelligent Sawing and Milling Machining Center
It can perform automated functions such as raw-material feeding, automatic cutting, automatic milling, automated output of finished parts, and automatic marking, achieving a high degree of overall machine automation and significantly enhancing processing efficiency.
Inquiry
Keywords:
智能锯铣激光加工中心
Sawing and milling equipment
Contact Us
Company Address: Huashan Industrial Park, Licheng District, Jinan City
Postal Code (P.C.): 250001
Telephone (Tel): +86-531-89619666
Fax: +86-531-89619888
Production Address: Yanshi Industrial Park, Dongchangfu District, Liaocheng City
Telephone (Tel): +86-635-7595888
Fax: +86-635-7986888
E-mail: jnkhjx@163.com
KH-900 Intelligent Sawing, Milling, and Laser Machining Center
Six-axis capability: Enables six drilling and milling spindles to operate independently, significantly boosting production speed; Intelligent operation: Integrates with ERP software to automate all machining processes.
KH-850 Intelligent Sawing and Milling Machining Center
It can perform automated functions such as raw-material feeding, automatic cutting, automatic milling, automated output of finished parts, and automatic marking, achieving a high degree of overall machine automation and significantly enhancing processing efficiency.
KH-750 Intelligent Sawing and Milling Machining Center
Automatic Discharge System: Automatically arranges the cut finished materials in sequence.
KH-700 Intelligent Sawing and Milling Machining Center
The fully enclosed saw-milling unit effectively prevents aluminum chips from splashing. Inside the unit, an automatic chip-removal system transports the cut-off scrap to a collection area and automatically discharges it outside the unit.
